Short design and best performance data
The multi-stage AMT spur gear drives are characterised above all by optimum performance data and the very short design. With their specific design, our axial drives enable completely different construction methods than angle drives and therefore constitute an ideal alternative.
Thanks to the high efficiency and the very direct controllability, axial drives are very popular for front wheel driven wheelchairs. However, due to these properties in combination with the compact design, these drives are also ideal for numerous other applications.
- High overall efficiency (up to 85%)
- Output speeds from 100 to 211 rpm
- Low noise (< 58 dBA at idle)
- Rated power from 200-650 watts
- Various output shafts up to 20 mm diameter possible
- Total load up to max. 150 kg per drive (i.e. with 2 drives installed, for example in a power wheelchair, up to 300 kg)
- 4-pin motors
- Nominal voltage 24V
- Lifetime lubrication
- Holding brakes
- with manual ventilation
- via rotary lever or cable pull
- 12V or 24V
- Braking torque 4 Nm
- Braking torques on the output shaft 68 Nm to 80 Nm
- Further options possible
- Special solutions on request
